Chain stopper is positioned between the windlass and the hawser pipe deck, used for clamping the chain. Anchor-handling, anchor chains tension can be transferred to the ship, the anchoring machine is not in the state of stress. When sailing, chain stopper bearing anchor and anchor chain part of gravity, and will receive the hawser pipe within the anchor stick to hull, without collision.
Features of JIS F2033 Roller Bar Type Chain Stopper
1.Model type: Roller Bar Type Chain Stopper
2.Standard: JIS F2033-1980
3.Material: cast steel.
4.Applicable to Grade 3 chain 70-132mm
6.Grey epoxy primer, polished, galvanized or bitumen painted.
7.Withstand 80% of chain cable’s minimum breaking load.
8.Competitive price, short delivery, excellent service
9.Available Certificate: ABS, CCS, LR, BV, NK, etc.
10.Customized service is available.
1) Length between perpendiculars (Lpp)
Distance between the fore and the aft perpendicular.
2) Length over all (Loa)
The horizontal distance from stem to stern.
3) Length on the water line (Lwl)
Horizontal distance between the moulded sides of stem and stern when the ship is on her summer mark.
4) Breadth (B)
The greatest moulded breadth, measured from side to side outside the frames, but inside the shell plating.
5) Breadth over all
The maximum breadth of the ship as measured from the outer hull on starboard to the outer hull on port side.
6) Draught at the stem (Tfwd)
Vertical distance between the water line and the underside of the keel, as measured on the force perpendicular.
7) Draught at the stern (Ta)
The vertical distance between the water line and the underside of the keel as measured from the aft perpendicular.
The difference between the draught at the stem and the draught at the stern.
Down and trimmed by the head. If the draft is larger at the stem, than at the stern.
Down and trimmed by the stern. If the draft is large at the stern, than at the stem.
On an even keel, in proper trim. The draft of the stern equals the draft of the stem.
The vertical distance between the base line and the upper continuous deck. The depth is measured at half Lpp at the side of the ship.
The distance between the waterline and the top of the deck at the side (at the deck line). The term summer freeboard means the distance from the top of the S-line of the Plimsoll’s mark and the topside of the deck line.
11) Air draught.
The vertical distance between the water line and the highest point of the ship. The air draught is measured from the summer mark. If the ship has less draught on can ballast until it reaches the summer draught and so obtain its minumum air draught.
Should you have any preference for the roller bar type chain stopper jis f2033, welcome to buy the quality equipment with our factory. As one of the most professional marine equipment manufacturers and suppliers in China, we will offer you good after-sale service and fast delivery.
←Previous: Adjustable Chain Stopper Type B CB/T 3822-99
Next: No Information→